Citing articles from OSA journals and other participating publishers are listed here. The proposed dual-layer structure is composed of a layer with randomly distributed sphere-like nano-patterns obtained solely by a maskless wet etching process and a pre-annealed bottom layer to maintain current spreading of the electrode. Link to Active This link will always route to the current Active version of the standard. The B joins this other A to the east of its terminus at Scalloway. The main A continues past the highest hill on the Shetlands, Ronas Hill. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. It passes close to a number of small villages without going through any large ones before Lerwick.

Name: Mooguk
Format: JPEG, PNG
License: For Personal Use Only
iPhone 5, 5S resolutions 640×1136
iPhone 6, 6S resolutions 750×1334
iPhone 7, 7 Plus, 8, 8 Plus resolutions 1080×1920
Android Mobiles HD resolutions 360×640, 540×960, 720×1280
Android Mobiles Full HD resolutions 1080×1920
Mobiles HD resolutions 480×800, 768×1280
Mobiles QHD, iPhone X resolutions 1440×2560
HD resolutions 1280×720, 1366×768, 1600×900, 1920×1080, 2560×1440, Original

This page was last modified on 21 Novemberat On a clear day you can just about make w970 the coast of Orkney. The A does not run through the centre of town. It was observed that the surface morphologies and optoelectronic properties are dependent on etching duration.

By continuing to use this site, you agree to our use of cookies.


Navigation menu Personal tools Log in. This abstract is a brief summary of the referenced s970. The road now passes through the small village of Voe and reaches the West coast of the island at Olna Firth. Click here to see what’s new.


Optics Express

The A has the unusual feature of having two spurs off the main road which also have the number A March 25, Manuscript Accepted: Click here to learn more. Within the text, the SI units are shown in brackets.

The road goes around the Western side of the airport alongside one of the runways for about half a mile then crosses the end of the other runway traffic crossing the runway is controlled by wig-wag lights. Password Forgot your password? This website uses cookies to deliver some of our products and services as well as for analytics and to provide you a more personalized experience.

The road starts to wind around the many hills and inlets. The road now loops around via Lerwick although it is possible to bypass Lerwick completely by turning left on to the B at Ward of Wick. The road passes through Brae, which is the only sizeable village along its route.

The A runs most of the length of main island of the Shetland Islands called “Mainland”. Privacy policy About Roader’s Digest: The road was closed for some time and contractors were still working in the area in June probably stabilising the slopes above the road to reduce the risk of it happening again.

Aberdeen – Lerwick and Kirkwall Ferry.

Like the A, the A also splits into two roads, both numbered A It turns left near the Loch of Clickimin and then around the back of the town; the roundabout junction here is the only full roundabout in Shetland.

The proposed dual-layer structure is composed of a layer with randomly distributed sphere-like nano-patterns obtained solely by a a70 wet etching process and a pre-annealed bottom layer to maintain current spreading of the electrode.


ASTM A / AM – 18 Standard Specification for Headed Steel Bars for Concrete Reinforcement

As you clear the airport a rare Allen-Williams turret can be seen in the field at the left hand side of the road — Shetland has many reminders from WWII one of the reasons for my visit to the islands! There are no restrictions on driving up this road and there is an excellent view from the a9770.

It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application.

This spur off the main A is about three miles long and rejoins the main line of the A at Bridge of Fitch. Material, manufacturing and testing requirements for the reinforcing bars shall be in accordance with other ASTM documents listed herein.

Express 21AA Click here to see a list of a70 that cite this paper.

Lane on A970 to be closed for remainder of the season

ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date. The requirements in Annex A1 only apply when specified by the purchaser see 4. This specification covers deformed and plain steel reinforcing bars in cut lengths with a head attached to one or both ends 9a70 reinforcing concrete structures.

Author: admin